TQ Hirsch 377e122f21 raised left motor mount, reduced size of frame to match extended rear corners, shortened rear corner idler posts to not interfere with frame

2022-03-07 12:49:47 +01:00

.openscad-format

Added openscad-format config

2022-03-04 15:12:11 +01:00

assembly.scad

raised left motor mount, reduced size of frame to match extended rear corners, shortened rear corner idler posts to not interfere with frame

2022-03-07 12:49:47 +01:00

constants.scad

added configuration for screwhole expansion, deepened screwholes for idler posts

2022-03-06 18:07:32 +01:00

gen_parts.scad

Added tool to generate BOM

2022-03-05 21:07:38 +01:00

genbom.sh

Added tool to generate BOM

2022-03-05 21:07:38 +01:00

lib.scad

Refactored corners to position motor based on motor_shaft_xoffset; changed rail holder to use a rectangular block, added slots for belt tension adjustment

2022-03-04 20:46:55 +01:00

parts.scad

raised left motor mount, reduced size of frame to match extended rear corners, shortened rear corner idler posts to not interfere with frame

2022-03-07 12:49:47 +01:00

stock_parts.scad

Fixed duplicated generation of xsled geometry, added clips for belts to xsled, fixed positions of ysled idlers to be based on nominal beltline

2022-03-05 21:05:37 +01:00

TODO.md

raised left motor mount, reduced size of frame to match extended rear corners, shortened rear corner idler posts to not interfere with frame

2022-03-07 12:49:47 +01:00

units.inc

Most of the frame up to the Y sleds is done

2022-02-22 22:08:01 +01:00

Description

No description provided

248 KiB

Languages

Rust 52.7%

OpenSCAD 46%

Shell 1%

Nix 0.3%